Nutsche Filter Dryer Manufacturer

Description

Description

• Nutsche Filter Dryer Manufacturer

  In order to meet the confined production process, filter washing and drying reactor, three-in-one filter has been developed. This production system can realize half automatic or complete automatic operation control.

  
  

• 
  

• 
  

  TOPTION developed 20L nutsche filter is Mmaily used for:

  
  

  1. Crystallization liquid filtration, washing, drying process.
  
  
  2. Include: feeding, beating, filtering, washing, drying, discharging, on-line inspection (optional), etc, key steps to prepare for the cleanroom of next  mixing process. 
  
  
  3. This Nutsche Filter Dryer has CIP, SIP functions.

• 
  

  Nutsche Filter Cleaner Dryer main features: 

  
  
  1. Nutsche Filter Cleaner Dryer should be installed in standard workshop which can meet GMP totally.
  
  
  2.Should filter or separate solid liquid material under vacuum condition or pressure condition.
  
  
  3. The slurry is should be washed during stirring.
  
  
  4. Can be flattened filter material to avoid the effects of filtration equipment, washing effect of the gap and ditch phenomenon.
  5. Use same or different washing liquid to clean material.
  
  
  6. Flatten the material to reduce moisture.
  
  
  7. Heat the jacket, bottom, blade by heating medium under vacuum condition to dry material.
  
  
  8. Can in situ cleaning (CIP) and in situ sterilization (SIP). 
  
  
  9. Can achieve in situ sampling.
  
  
  10. Matched with one set detachable filter chassis tank components.
  
  
  11. Install vertical single layer two blade  S shape stirrer.
  
  
  12. One pc manual discharge valve/ sampling valve.
  
  
  13. Filter area: 0.07  M2.
  
  
  14. Ftirrer can be lift with height  100  mm.
  
  

• 

• 
  

  Technical parameters of TOPTION new design 20L nutsche filter dryer:

  
  

  No	Details
  1	description	0.07m2
  		filtering accuracy	5μm Standard 5um 1um-2mm is optional
  		Inner diameter	300mm
  		volume	0.02m3
  		Empty weight	600kg
  		Total height	1700mm+150mm
  		Tank design pressure	-0.1～0.4MPa
  		Jacket operation pressure	0.5MPa
  		Tank operation temp	0～160℃
  		Jacket operation temp	0～160℃
  		Tank working medium	Chemical materials
  		Jacket working medium	Cooling water, hot water, hot oil, steam
  		Heating position	Tank(jacket), bottom (jacket)
  		Discharge method	Manual side discharge
  		Pressure tank design standard	GB150.1～150.4-2011
  		Flange design standard	HG20592-2009
  		Clamp design standard	ISO2852
  		Discharge valve port size	100
  		Discharge port size	50
  2	Mixing drive apparatus	100mm
  		Stirrer motor power	1.1kw
  		voltage	220 V
  		Rated frequency	50Hz
  		phase	2
  		Max rotation speed	15rpm
  		Min rotation speed	0rpm
  3	main configuration list	Coaded with PTFE
  		Gear motor	Eugene
  		Reducer	1:100 Reduction ratio
  		Machinery Seal	Mechanical seal, wetted material 316L, + bellows
  		Spray ball	Fixed type, 1 pc, SS316L

• 
• 
•