TP-S30 Pilot Two-fluid Spray Dryer

Description

Description

• 1. Laboratory table top spray dryer is the latest type of TOPTION which adopts advanced international technology and spare parts. 

  2. TOPTION Laboratory Spray Dryer assembles many of new design, for example, small size for free moving, combining air compressor and electrical heater inside the cabinet, glass spray and cyclone separator for inspecting. All the data and functions are controlled by PLC. 

  
  

• 
• 
• 

• 
  

  Spray dryer can be used in a wide range where the production of a free-flowing powder sample is required. This technique has processed materials in the following areas successfully:

  
  
  1. Beverages, Flavours and Colouring, Milk and Egg Products, Plant and Vegetable Extracts, Pharmaceuticals, Heat sensitive Materials, Plastics, Polymers and Resins, Perfumes, Ceramics and Advanced Materials, Soaps and Detergents, Blood, dyestuffs, Food Stuffs, Adhesives, Oxides, Textiles, Bones, Teeth and Tooth Amalgan and many others.
  
  
  2. Most solutions and supernsions can be spray dried providing that the resulting product has the characteristics of material.
  
  

  3. It is popular in fields of Food, biology, material, pharmacy, university, and R&D institute, etc. especially for processing temperature-sensitive material , for e.g., powder, because material only touch air for a brief moment so that heat couldn’t destroy the component of material.

  
  

• 

• 
  

  Working principle of spray drying equipment

  
  

  1. The air are filtered and heated ,then into the distributor on the top of the dryer, spiral hot air evenly go into drying chamber.

  
  
  2. Liquid through the high-speed centrifugal atomizer on the top of the tower , then (rotation)spray into very fine mist droplets,contact with hot air and dried into the finished product in a very short time. 
  
  
  3. Dried product are continuously produced from the bottom of the drying tower and the cyclone , the exhaust are vented by fan.  

• 

• 
  

  Advantages of TOPTION spray drying equipment

  
  

  1. PLC automatic control, more convenient for you to control and manage.

  
  
  2. High speed of drying, after spraying of the material liquid, the surface area of material will be increased greatly, make your research more efficient.
  
  
  3. In the hot-air flow, 95%~98% of water can be evaporated at a moment. You can finish material drying only in several seconds.
  
  
  4. Especially suitable for drying the heat sensitive materials, after drying, there’s no need for smashing and sorting,so as to reduce the operation procedures and save your time.

• 

• Technical parameters of spray drying equipment

  Item	Unit	TP-S30
  Max capacity	ml/h	3000
  Temperature range   of inlet air	℃	30℃ ~ 300℃
  Temperature range   of outlet air	℃	30℃ ~ 140℃
  Precision of   temperature	℃	±1
  Dryer time	S	1.0 ~ 1.5
  Speed of squirt   pump	ml/h	3000
  Spray system	/	Two-fluid nozzle
  Spray direction	/	Downwards co-current
  Total power	/	10KW 380V
  Stainless steel   tank diameter	mm	800
  Dried powder restoring   rate	%	≥95
  Rotate speed	rpm	40000
  Dimension	mm	1700*1100*150

• 
• 
• 
•