Pilot Spray Dryer Design Centrifugal Spray Dryer Suppliers

Description

Description

• Pilot spray dryer use centrifugal spray drying nozzle, its capacity contains 25L/h, 50L/h, 100L/h and other capacity spray dryer machine customization is supported.

• 
• 

• 
  

  Centrifuge spray dryer is a kind of continuous atmospheric dryer.Use pneumatic or electric atomization device to make liquid high-speed centrifugal spray as fog droplet, make these fog droplet contact with the hot air in the drying chamber and instantaneous drying. 

  
  

  Application of pilot spray dryer – electron, ceramic, magnetic materials, battery material, food industry, pharmaceutical and chemical industry,etc.

  
  

  Pilot spray dryer machine working principle:

  Air through filtering and heating, enter the hot air distributor which is at the top of spray dryer, hot air spiraling evenly into the drying chamber. Liquid through the high-speed centrifugal automizer which is at the top of drying chamber, (rotating) 

  centrifugal spray into tiny fog droplet, then contact with the hot air flow, drying finish product in a very short time & whereabouts.

  
  

  Finished product output continuously between the drying tower bottom and cyclone separator, exhaust through dust catcher emptying by induced draft fan.

• 

• 
  

  Your benefits of ISO & CE certified spray dryer:

  
  

  1.It can produce spherical powder with good liquidity.
  2.It can produce granules products with uniform particle size distribution.
  3.It can reduce the wall sticking amount of atomization flight line.
  
  
  4.The average particle size of powder can be adjusted.
  5.With low cap way, improve the recovery rate of granulation products.
  6.Equipped with high temperature and high efficiency filter, to prevent products cross contamination.
  
  
  7.Equipped with bag filter, which can improve the recovery of fine powder, exhaust gas cleaning, prevent pollution.
  8.Hot air temperature automatic control, the difference range of set valve is small.
  9.Spray dryer has realized the miniaturization, takes up less space and easy operation.
  10.Particle size distribution and apparent density can be adjusted by the various spray tray.
  
  

  Technical parameters of centrifugal spray dryer:

  
  

• Model	TP-S25L	TP-S50L	TP-S100L
  Inlet temp. (℃)	≤350℃
  Outlet temp. (℃)	＜80-90℃
  The largest water evaporation (kg/h)	25	50	100
  Centrifugal spray head drive mode	Mechanical drive
  Rotate speed	22000	21500	18000
  Diameter of spray tray (mm)	102	108	108
  Heat source	Electric	Electric + steam; Fuel oil; Coal gas	Electric + steam
  Dimension L*W*H	3*2.7*4.26	3.7*3.2*5.1	4.6*4.2*6
  Dry powder recycle %	≥95

• 
• 
• 
•