Industry Spray Dryer Food Industrial Spray Dryer Machine Manufacturer

Description

Description

• Industry spray dryer use centrifugal spray drying nozzle, 150L/h, 200L/h – 2000L/h large spray drying equipment could be customize, support installation and TOPTION industry spray dryer manufacture visit and test machine,ISO & CE certification quality guarantee.

• 

• 
  

  Spray drying equipment is a kind of continuous atmospheric dryer.Use pneumatic or electric atomization device to make liquid high-speed centrifugal spray as fog droplet, make these fog droplet contact with the hot air in the drying chamber and instantaneous drying. 

  
  

  Application of spray drying equipment – electron, ceramic, magnetic materials, battery material, food industry, pharmaceutical and chemical industry,etc.

  
  

  Food industrial spray dryer machine working principle:

  Air through filtering and heating, enter the hot air distributor which is at the top of spray dryer, hot air spiraling evenly into the drying chamber. Liquid through the high-speed centrifugal automizer which is at the top of drying chamber, (rotating) 

  centrifugal spray into tiny fog droplet, then contact with the hot air flow, drying finish product in a very short time & whereabouts.

  
  

  Finished product output continuously between the drying tower bottom and cyclone separator, exhaust through dust catcher emptying by induced draft fan.

• 

• 
  

  Your benefits of ISO & CE industry spray dryer:

  
  

  1.It can produce spherical powder with good liquidity.
  2.It can produce granules products with uniform particle size distribution.
  3.It can reduce the wall sticking amount of atomization flight line.
  4.The average particle size of powder can be adjusted.
  5.With low cap way, improve the recovery rate of granulation products.
  6.Equipped with high temperature and high efficiency filter, to prevent products cross contamination.
  7.Equipped with bag filter, which can improve the recovery of fine powder, exhaust gas cleaning, prevent pollution.
  8.Hot air temperature automatic control, the difference range of set valve is small.
  9.Spray dryer
  has realized the miniaturization, takes up less space and easy operation.
  10.Particle size distribution and apparent density can be adjusted by the various spray tray.
  
  

  Technical parameters of centrifugal spray dryer:

  
  

• Model	TP-150L	TP-S200L-2000L
  Inlet temp. (℃)	≤350℃
  Outlet temp. (℃)	＜80-90℃
  The largest water evaporation (kg/h)	150	200-2000
  Centrifugal spray head drive mode	Mechanical drive
  Rotate speed	18000	15000
  Diameter of spray tray (mm)	150	180-340
  Heat source	Electric + steam; Fuel oil; Coal gas	User could solve by self
  Dimension L*W*H	5.5*4.5*7	Based on actual situation
  Dry powder recycle %	≥95

• 
• 
• 
• 
•