-
How To Maintain Heater & Chiller In Daily Life？
Heating and cooling circulators bath
is mainly equipped with distillation | filtration | evaporation
equipment, precise temperature control will directly affect the efficiency of distillation or filtration equipment, so choose suitable temperature control system and how to maintain the heater and chiller is most important. -
1. We suggest to check the fastening bolt of power wiring if it is loose, the normal status of high or low pressure value, and the running current or insulation resistant regularly.
2. It is vital that lubricating lube of heating and cooling circulator compressor
works. When operating, the fuel level is lower than two of thirds of oil sight glass, lubricant should be added,if there is foul or deterioration, lube should be replaced.3. It is suggested that when heating cooling circulator
has been used for a long time, conduction oil should be checked every three or six months, and the replacement is determined according to the practical situation. If your heating cooling circulator
is totally-enclosed type, please pay attention to the replacement when foreign matter or water go into the oil box.4. Please inform us if the heating cooling circulator
is not used for the time being, to clean the conduction oil left in the pipe, and to maintain and keep dry.5. Please keep the surface of the cooling coil of the low-temperature coolant recirculation device clean to ensure that the nearby air is unobstructed and the temperature is low. Clean the dirt on the coil on schedule to ensure a good heat exchange effect.
-
Heating and cooling circulators
has a wide working range and is used in the pharmaceutical, chemical, biochemical, biological and other industries. If you want to equip temperature control system to molecular distillation equipment
, crystallization filter reactor, glass reactor, rotary evaporator, welcome contact [email protected]
24h/7days online service.
