Lab Molecular Distillation Essential Oil Distillation Equipment

Below a distillation plant for laboratory use is described. The plant is used for:

-Process development.                 -Feasibility studies.                 -Continuous distillation of smaller quantities.

-For heat sensitive chemical, pharmaceutical and food products.

The achievable operating pressure may be as low as 0.001 mbar in the short path evaporator. (Depending on 

product and process).

Technical data of the molecular distillation unit:

1.Material feeding system:

-Feed tank: 1L jacketed glass tank.

-High precision gear pump feed (3-15L/H). Feed tank jacket design, can be heated and achieve heat preservation 

by circulating heat conduction oil.

2.Short path evaporator:

-Material (contact with products): S304 stainless steel.                -Evaporator surface: 0.06㎡.

-The heating medium of evaporator: Conduction oil.                    -Design temperature of evaporator jacket: 350℃.

-Design pressure of evaporator jacket: 0.4Mpa.                           -Heating segment: 1.

-Film forming system: Self-cleaning roller type film forming system.

-Motor & reduction gears: Electrodeless reduction gears, 0.12KW.

-Sealing type: mechanical seal.

Note: The end of the pipe mouth is also a jacket design, no heating dead Angle, make heat preservation be more 

comprehensive.

3.Heavier component discharge system:

Continuous discharge gear pump (3-15L/H).
 
4.Lighter component discharge system:

-1set condenser whose heat exchange area is 0.1㎡, cooling and collecting the distillation extract light component, 

material is S304 stainless steel.

-Continuous discharge gear pump (3-15L/H).

5.Heating & Cooling Unit:

Welcome visit our molecular distillation equipment factory, contact info@toptionlab.com now, we will reply

you with 1-6hours.