Lab Spray Dryer Manufacture Suppliers TP-S50/100

0 out of 5

  • Max Capacity is 5L/H,10L/H.

    Convenient operation and easy control. 

Request a Quote

Description

Lab scale spray dryer manufacture suppliers TP-S50/100,Centrifuge spray dryer is a kind of continuous atmospheric dryer.Use pneumatic or electric atomization device to make liquid high-speed centrifugal spray as fog droplet, make these fog droplet contact with the hot air in the drying chamber and instantaneous drying.

Descritption

  • Lab scale spray dryer manufacture suppliers TP-S50/100

    Lab scale spray dryer is a kind of continuous atmospheric dryer.Use pneumatic or electric atomization device to make liquid high-speed centrifugal spray as fog droplet, make these fog droplet contact with the hot air in the drying chamber and instantaneous drying.

  • Lab Spray Dryer Manufacture Suppliers TP-S50/100;
        • Technology Parameters Of lab scale spray dryer TP-S50/100


        Item

        Unit

        TP-S50

        TP-S100

        Max capacity

        ml/h

        5000

        10000

        Temperature range of inlet air

        ℃

        140°C ~ 300°C
          Adjustable

        50°C ~ 300°C

        Temperature range of outlet air

        ℃

        80°C ~ 90°C

        30°C ~ 150°C

        Spray system

        /

        Centrifugal   nozzle

        Centrifugal   nozzle

        Precision of temp

        ℃

        ±1

        ±1

        Dryer time

        S

        1.0 ~ 1.5

        1.0 ~ 1.5

        Speed of squirt pump

        ml/h

        5000

        10000

        Nozzle size

        mm

        Spray direction

        /

        Downwards   co-current

        Downwards   co-current

        Heater Power

        /

        6800W

        12000W

        Total power

        /

        9000W  380V

        22000W  380V

        Heat source

        /

        Electric

        Electric

        Air compressor

        /

        Built-in   oil-free air compressor

        Built-in   oil-free air compressor

        Dried powder restoring rate

        %

        ≥92   (Maltodextrin>92)

        ≥92  (Maltodextrin>92)

        Dimension

        mm

        1800*930*2200

        2500*1600*2800

        Maximum moisture evaporation

        Kg/h

        5

        10

              Working Principle Of Lab Spray Dryer Manufacture Suppliers TP-S50/100

            Air through filtering and heating, enter the hot air distributor which is at the top of spray dryer, hot air spiraling evenly into the drying chamber. Liquid through the high-speed centrifugal automizer which is at the top of drying chamber, (rotating) centrifugal spray into tiny fog droplet, then contact with the hot air flow, drying finish product in a very short time and whereabouts. Finished product output continuously between the drying tower bottom and cyclone separator, exhaust through dust catcher emptying by induced draft fan.

             

  • Lab Spray Dryer Manufacture Suppliers TP-S50/100;

      • Product features of industrial laboratory spray dryer price

        1) It can produce spherical powder with good liquidity.
        2) It can produce granules products with uniform particle size distribution.

        •  3) It can reduce the wall sticking amount of atomization flight line.

           4) The average particle size of powder can be adjusted.

           5) With low cap way, improve the recovery rate of granulation products.

           6) Equipped with high temperature and high efficiency filter, to prevent products cross contamination.

           7) Equipped with bag filter, which can improve the recovery of fine powder, exhaust gas cleaning, prevent

          pollution.

           8) Hot air temperature automatic control, the difference range of set valve is small.

           9) Spray dryer has realized the miniaturization, takes up less space and easy operation.

           10) Particle size distribution and apparent density can be adjusted by the various spray tray.


          Working Principle Of industrial lab spray dryer


          Air through filtering and heating, enter the hot air distributor which is at the top of spray dryer, hot air spiraling evenly into the drying chamber. Liquid through the high-speed centrifugal automizer which is at the top of drying chamber, (rotating) centrifugal spray into tiny fog droplet, then contact with the hot air flow, drying finish product in a very short time and whereabouts.Finished product output continuously between the drying tower bottom and cyclone separator, exhaust through dust catcher emptying  by induced draft fan.

  • Lab Spray Dryer Manufacture Suppliers TP-S50/100;
  • Lab Spray Dryer Manufacture Suppliers TP-S50/100;

      • Product Application Of Lab Spray Dryer Manufacture Suppliers TP-S50/100

        This spray dryer is mainly used to make liquid material directly into micro powder, you don’t need to do material filtration, concentration and smash before drying, very convenient and make your drying process high efficient. Suitable for all solution such as emulsion, suspending liquid, etc.

          Product Characteristics Of Lab Spray Dryer Manufacture Suppliers TP-S50/100


          1. Quickly drying speed. Liquid material after centrifugal spraying, the surface area will increased greatly, in high temperature air flow, the moment will evaporate 95~98% of moisture content, so drying time will be about at ten seconds.

          2. Adopt parallel flow pattern of spray drying, during drying process, the temperature of the liquid droplet is not high, which promise high quality products.

          3. Wide applied area. According to the material properties, can use hot air drying, and also could use the cold wind model.

          4.Due to the drying process is completed in an instant, the product of the approximate spherical can basically keep droplets shape, so the product is good dispersion, fluidity and solubility.

          5. Production process is simple, convenient operation and easy control. 

          6. In order to protect the material away from pollution and extend the device service life, all parts contacting with material all adopt 1Cr18Ni9Ti stainless steel materials. In order to make operation easily, the control system use integration operation, which means that install every part’s indicating device and on/off device all in control cabinet.

  • Lab Spray Dryer Manufacture Suppliers TP-S50/100;
          • Product Packing  Of Lab Spray Dryer Manufacture Suppliers TP-S50/100

  • Lab Spray Dryer Manufacture Suppliers TP-S50/100;
      • Certification Of Lab Spray Dryer Manufacture Suppliers TP-S50/100

      • Our Factory Of Lab Spray Dryer Manufacture Suppliers TP-S50/100

  • Lab Spray Dryer Manufacture Suppliers TP-S50/100;