Parallel Micro High Pressure Reactor Customize

Description

Description

• 1.Parallel micro high pressure reactor do research with more than one THR series high pressure reactor at the same time.

  
  

  2.Each THR high pressure reactor is equipped with independent heating, stirring and pressure component, to ensure every high pressure reactor could do research independent under different temperature, pressure and stirring speed conditions, so as to screen experimental conditions more quickly and optimize it.

  
  

• 

• 3.The reaction kettle bit and volume could be flexible combination, for ordinary, has 2, 4, 6, 8 parallel high pressure reactor, you could customize based on your actual experimental requirements.

• 
• 

• 1. Pressure meter.	2. Safety valve.	3. Temperature sensor.
  4. Inlet valve.	5. Sampling valve.	6. Vent valve.
  7. Heating switch.	8. Stirring switch.	9. Rotating speed display meter.
  10. Temperature display meter.	11. Rotating speed control button.	12. Temperature control button.
  13. The first via inlet valve.	14. The second via inlet valve.

• 
• 

• 
  

  Technical parameters of parallel micro high pressure reactor customize

  
  

  Model	THR50（N）	THR100（N）	THR250（N）	THR500（N）
  The reaction kettle bit	N=2, 4, 6, 8
  Material capacity(L)	50ml	100ml	250ml	500ml
  The working interface	Touch control liquid crystal display
  The maximum operating temperature	250℃	250℃	250℃	250℃
  The maximum operating temperature with PTFE Liner	180℃	180℃	180℃	180℃
  Heating mode	Module heating
  The heating power	1.2KW	1.2KW	1.5KW	2.0KW
  Stirring speed	0-1200rpm	0-1200rpm	0-1300rpm	0-1300rpm
  Stirring method	The internal magnetic stirring
  The stirring power	40W	40W	40W	80W
  The maximum working pressure	10Mpa	10Mpa	10Mpa	10Mpa
  Materials of construction	SS316L (standard); (Alloy TA2, ALLOY C-276, are optional)
  PTFE liner	Optional

• 
• 
• 
  
•