RE-52AA 1L Laboratory Vacuum Evaporator, Rotary Evaporator
-
Lid for water bath to increase evaporation efficiency by 15%, safe & useful.
Vacuum pump & vacuum controller are available.
Idea instrument for concentration, drying and recycling.
- Description
Description
Descritption
-
TOPTION RE-52AA 1L rotary evaporator lab small type evaporation machine is suitable for chemistry laboratory, modern organic laboratory, university teaching, to remove solvent from samples by evaporation. Automatic lifting type and manual lifting economical type are optional, matched vacuum pump, chillers are available, if you need larger types, TOPTION provide wide capacity range from 1L 2L 3L 5L 10L 20L 30L 50L 100L lab pilot industry various types.
-
Ordinary rotavapor operating problems include evaporation speed is slow? vaporized solvent cannot be well collected? Sudden bumping destroys everything you collected? Trouble again on vacuum pump. Awful smell aroud in lab? etc.
Please check the differences after using TOPTION rotary evaporation set.
1. Three types condensers available for different operation requirements. Standard condenser for normal use. Cold trap type for low boiling point solvent condensing. etc.
2. PTFE sleeve inside taper joint helps to prevent dead seizure, and increase sealing performance.
3. Taper joint lock and release device design.
4. Automatic lifting heating bath, prevents movement of glassware like evaporation flask is safe and easy to operate.
5. Lid for water bath, which can increase evaporation efficiently by 15% and save bath water by 60%. Also could protect operators, which is safe and useful.
6. Anti-corrosion and wearable sealing system, which are specially designed and precisely manufactured. 90% users don’t need to replace rotary seal in one year.
7. Laboratory vacuum evaporator whole set customization, include chillers, vacuum pump, vacuum controller.
-
- 1L rotary eavporator technical parameters
Relevant model RE-52AA 1L rotary evaporator Rotating flask 0.5L Optional Rotating Flask 0.1L, 0.25L, 1L or 2L Receiving Flask 0.5L Lifting Type Automatic lifting Condenser Vertical type Rotation Speed 0 – 150 Evaporating Speed 1.2 L/h H2O Reachable Vacuum Rate Vacuum pump is available, < 133Pa (1.33mbar, 1 Torr) Bath Power 1.1 KW Staic Temp. Control Range & Wave RT-99 + – 2 celsius degree Power 220V 50/60Hz Basic configuration of RE-52AA laboratory type rota evaporation machine
Relevant Model RE-52AA rotary evaporator Charging Valve Glass PTFE Discharge Valve PTFE PTFE Rotary Seal Assembly Have Overall Flange Joints Have Taper Joint PTFE Sleeve Have Frequency Conversion Speed Control Have Vacuum Meter Have Throttle Valve For Vacuum Have Thermometer Neck For Vapor Optional Continuous Receiving Have Digital Display Bath temperature Evaporating Flask Unload Handler Optional Ex-proof Motor Optional Cold Trap Protection System Optional Bumping System Have Optional Evaporating Flask (baffles available at request) 1L 2L
