Scraped Film Evaporator TOPTION China
-
New highly effective evaporator.
Low distillation temperature, high distillation vacuum degree.
Short heating time, high separation degree.
- Description
Description
Description
-
Scraped Film Evaporator TOPTION China
Thin film evaporator is a new highly effective evaporator blows the film installment through tube in solvent revolving to cause the material continuously evenly to force the membrane in the heating surface, carries on under the high vacuum condition falls.
-
Technical parameters of 2 square meter wiped film evaporator:
Main body
Model
PWFS-2C wiped film evaporator
Material tank
Customer’s own storage tank
Material charging
Gear pump
Flow 30L~260L/H
1.5KW frequency control
Evaporator
Evaporation area 2㎡
Film forming way: scraper (roller is optional)
Material:316L
Mechanical seal
Film forming motor:3KW, frequency control
Cold trap
5㎡tube nest
Heavier component discharge
Gear pump
Flow 30L~260L/H
1.5KW frequency control
Lighter component discharge
Gear pump
Flow 30L~260L/H
1.5KW frequency control
Material pipeline
Jacketed insulation
Shelf & assemble
304 stainless steel pipe
Accessory
Vacuum
Water jet pump TL-40,Large square water pump
Main evaporator heating
200℃/38KW
Raw material section insulation
1. 200℃/5.5KW
External condenser cooling
1. Circulating water , low cost
2. Industrial chiller
-
Why choose TOPTION wiped film evaporator:
1.Vacuum pressure drop is small- There exists certain differential pressure when the material evaporating gas arrives condenser through heating surface. For ordinary evaporator, the vacuum pressure drop is high and even higher than accepting range.
- But for thin film evaporator, it has enough big space for gas running, the pressure in evaporator is about as the same as the pressure of condenser, so, vacuum pressure drop is small, vacuum degree could arrived 5mmHg.
2.Operating temperature is low- Whole evaporation process is done under high vacuum degree condition, and the related material boiling point reduce quickly, so it could operating under lower temperature and reduce material thermal decomposition.
3. Heating time is short- The special structure of thin film evaporator and the pumping action of scraped film device, let the material staying time in evaporator is short. Besides this, on the heating evaporation device, the material will not stay at the evaporator surface as high speed film flow.
- So this kind scraped film evaporator is suitable for heat sensitive material evaporation.
4. Evaporation intensity is strong- The boiling point of material is reduced, then the temperature difference is bigger between same thermal medium.
- The function of scraped film device has reduced the thickness of liquid film and reduced the thermal resistance.
- At the same time, it could prevent material attachment and scaling, with good heat exchange, so as to improve the film evaporator overall coefficient of heat transfer.
5. Operating flexibility is big- The unique characteristics of thin film evaporator has made it be suitable for heat sensitivity material and high viscosity & viscosity sharply increased with concentration increasing material, so the evaporating process is stable and reliable.
- It can also successfully applied to the material (which contains solid particles, crystallization, aggregation, scaling, etc.) evaporation and distillation.
-
CE certification, ISO approved wiped film molecular distillation equipment manufacturer, reliable quality guarantee, welcome factory visit [email protected]
24h/7days online service.