-
Thin film evaporator
, you could call it scraped film evaporator
, falling film evaporator
or wiped film evaporator
, it is a new highly effective evaporator, and widely used to evaporate, condense, decolor, trip, react, degas, deodorant the materials with high heating-sensitive and easy to oxidate. -
Low distillation temperature, high distillation vacuum degree, short heating time, high separation degree,etc, these are the obvious advantages of thin film evaporator
, which has make wiped film evaporator becomes an excellent method for gently thermal treatment of heat sensitive, high boiling products.At present, there are hundreds of products used in thin film evaporator. The thin film evaporator
is widely used in medical, pesticide, oil and fatty chemical industry, fine chemical industry, commodity chemical industry, biology chemical industry,etc.TOPTION thin film evaporator process
process is blowing the film installment through tube in vivo revolving to cause the material continuously evenly to force the membrane in the heating surface, carries on under the high vacuum condition falls.Thin Film Evaporator How It Works?
1.Material through the upward side of heating zone radial direction come into evaporator, then through distributing device distribute into heating surface of evaporator, and the rotating film scraped device let feedstock material into uniform liquid film, finally spiral push downward. During this process, rotating film scraped device promise continuously and uniformly letting the liquid film do high speed turbulence flow, and prevent liquid film coking and scaling during heating process, so as to improve overall coefficient. Light component through evaporation form steam so as to go up, then through gas liquid separator arrived into condenser, heavy component is discharged from the cone of evaporator bottom.
2.Unique distributing device not only could distribute the material to inner surface of evaporator uniformly, prevent material splashing in evaporator and sprinkle in steam flow, but also could prevent new charging material flash at this place, great help to remove the foaming, and let the material only evaporate along heating surface.
3.Centrifugal separator is customerized to scraped film evaporator according to material characteristics, separate the liquid drop which is contained in rise steam, and let it back to distributing device.
If you are work in Traditional Chinese medicine and western medicine,Light food,Grease chemical, Synthetic resin, Synthetic fiber, Petrochemical, Biological pesticide,Waste water fields, and want to get highly effective evaporation process, then welcome contact TOPTION communicate your thin film evaporator customization
together: [email protected]
(24h/7days service).
