-
TOPTION Lab Spray Dryer, Why Believe TOPTION Brand Spray Dryer Machine?
Firstly, we need to learn spray drying
working principle
together:1.The drying liquid items go from container into the spray system through the perstaltic pump, liquid through nozzle spray into drying cavity, and at the same time,compressed gas through outside jacket tube into drying cavity so as to let liquid been micronization.2.The hot air go from the upper into drying cavity and meet with items liquid particles which is after spraying,then item liquid begain drying.3.Dried powder through cyclone separator to separate with exhaust gas and then go into the collection bottle. The exhaust gas go into the atmosphere directly by flexible tube which is 50mm diameter.4.The drying device could through the control panel directly control the wind inlet temperatureã€hot air flowã€peristaltic pump speed and compressed gas flow, etc variables. -
Then let’s learn why we believe TOPTION brand quality guarantee spray dryer machine
?No.
Related Characteristics
Others Brand Spary Dryer
1
Material
The material which is contact with product we use 316L medical grade stainless steel and high temperature resistance 3.3 borosilicate glass, panels use laboratory advanced spraying penel.
Domestic stainless steel wire drawing panel and common glas suite.
2
Peristaltic Pump
Stepless speed regulation, which is convenient operation and adjustion.
Domestic, classification of speed adjustment,when adjust the feed fluctuation is big.
3
Atomizing System
Patent technology, atomization effect is continuous and stable, liquid droplet is uniform, this is JiaoTong university’s technology, so its maintenance cost is low.
Feed atomization has fluctuations easily, short using life, usually need to repair and replace parts.
4
Two-stream Nozzle
Dedicated nozzle, professional produce, independent development and intellectual property, the material is AISI316.
Domestic, common stainless steel material.
5
Electrical heater
AISI304 Material，continuous heating and stable temperature
Stainless steel or carbon steel,temperature fluctuation when continous heating.
6
Drying Cavity
Acid-proof 3.3 borosilicate glass, high polished and unique design to avoid material adhering on the wall.
Easily adhere on the wall.
7
Cyclone Separator
Unique design, efficient recovery powder, can be dismantled for easily cleaning.
Low efficient recovery powder, parts powder lost.
8
Control Component
Including electric and pneumatic components, all is foreign brands or domestic well-known brand, good quality,operate safty, stable control and instrument true modularity.
Domestic general components, service life is relatively low,the signal is relatively not stable.
9
Control system
Embedded control chip,high control precision,stable system and stable temperature control, volatile small, continuous operate, could get the stable experiments data,and experiments has good reproducibility.
Digital tube PLC controlã€low temperature sensor precision,the temperature control volatile,could not be able to continuous produce, according to the experiment data, the replication is poor.
10
The Final Powder
Get good shape powder samples directly, the particles is natural sphere and could drying high speed. Continuously produce powder which is uniform and good stability. Provide important data for industrialized production.
Poor powder shape, the particles is not nature globular, poor uniformity, data analysis has certain deviation and occasionality, is not conductive to enlarge the production.
11
After-sale Service
1 year warranty period,the customer all application problems we propose solutions in 8 hours, or go to customers’ place within 24 hours.
1 year warranty period, but response time is too long.
-
How to install spray drying machine?
1. Hold up the drying chamber and fit it to the fixed pallet (place in the white PTPE cushion block, and then lock the quincunx handle).2. The cyclone separator fits directly into the exhaust stack after the nut, sealing ring & stainless steel shim fit into the air-outlet tube of cyclone separator, adjust the positions of air-outlet of the drying chamber & air inlet of cyclone separator, until they can be put in order completely, and lightly tighten the nut.3. Join sample collection flask and cyclone separator with Clip hoop.4. Join the waste collection tube and the main chamber with Clip hoop.5. Sprayer fits into the equipment and fit the 4mm nylon tube(for de-block piston) and 6mm nylon tube(for spray).6. The silicone tube is fitted through the peristaltic pump and placed into the sample feed inlet of sprayer. -
More lab spray dryer machine customize, welcome contact [email protected]
24h/7days service.
