-
Xenon light source operation, What should I pay attention?
Xenon lamp light
source is divided into long arc xenon lamp and short arc xenon lamp according to the classification of the bulb structure. According to different irradiation methods, it can be divided into internal light source and external light source. -
1. The sharp protrusion at the rear of the bulb is the bulb seal, which is fragile, so it is strictly prohibited to hit it.
2. Before starting and during the operation of the xenon light source
, make sure that the fan is in working state. If the fan fails, it is strictly forbidden to turn on the fan.3．Please do not move while the xenon light source
is working.4．When the xenon light source
is running, please do not look directly at the light outlet. If you need to observe the spot condition, you must wear protective glasses.5．When the xenon light source
is running, do not touch the surface of the heat sink and the filter to avoid burns.6．Pay attention to the cleanness of the working environment to avoid small objects from falling into the cooling holes above the light box.
7．The operating current must not exceed 21AMP (amps).
8．When the high-voltage module fails to ignite and light up the lamp for many times (about 10 times), please do not continue to try, you should immediately replace the lamp or contact us through [email protected]
9．Please do not use a lamp other than this model, as it may cause power damage, failure or explosion.
Xenon lamp light source
has a wide range of applications, such as various types of photocatalytic experiments, photolysis of water to produce hydrogen and photodegradation of pollutants, simulated sunlight and visible light acceleration experiments, various simulated sunlight ultraviolet wavelength acceleration experiments and other studies.If you need customize xenon lamp light source
, welcome contact [email protected]
24h/7day online service.
